Flytanium Spyderco Manix 2 Copper Ball Cage Lock, FLY603

Replace your stock plastic ball cage lock with a unique copper one from Flytanium. Our new copper ball cage lock will fit both the Manix 2 and Manix 2 XL (but not the lightweight models due to pin construction). We finished these with an antique stonewash finish. This handy piece weighs in at just 0.17 oz.

Due to the nature of copper, a beautiful, natural patina will form over time, and some patina may be present when your piece arrives. If you prefer a brighter look, we recommend cleaning with Bar Keeper's Friend soft cleanser - a cheap, quick, and easy way to brighten up all your copper and brass.

Because each knife is slightly different, there is a break-in period when you install your new ball cage lock. Spend an afternoon playing with your knife, enjoying your new lock, and you’ll be good to go!

*Installation of the ball cage lock requires some basic tools and knowledge. You will need a high quality torx bit set to remove the screws and pivots. The pivot and lanyard tube can be tough to remove. There are some good informational videos on YouTube if you need more instructions.

Disclaimer: There are many small parts and pieces on the Manix 2. It is NOT easy to take apart. Disassemble at your own risk.

*Please Note: Spyderco's Warranty does not cover disassembly of any knife by any person other than Spyderco’s Warranty department.

Unless otherwise specified, these parts fit the base production model of a given knife and may not fit limited editions or variations. Please contact Flytanium if there are any questions.