Hinderer XM-18 3.5 S45VN Harpoon Spanto Tri-Way Working Finish - OD Green G10

XM-18 3.5" Harpoon Spanto

Blade Grind: Harpoon Spanto
Blade Length: 3.50″
Handle Length: 4.75″
Overall Length: 8.25″
Blade Thickness: 0.165″
Lockside Thickness: 0.165″
Liner Thickness: 0.050″
Overall Handle Thickness: 0.540″
Handle Material: G10
Blade: Working Finish
Lockside: Working Finish
Weight: 5.6oz
Blade Steel: CPM-S45VN
Made in the USA

XM Generation 6 with Tri-Way pivot system. System includes three different interchangeable pivots: teflon, phosphor-bronze and bearing.

The XM-18 is known the world over as one of the toughest tactical folders regardless of your mission. Rick’s focus when designing the XM-18 was a no nonsense tactical tool ready for the simplest cutting tasks to high speed low drag operations.

The over-sized choil permits choking up on the blade for more precise work. The blade locks up on a solid ¼ in diameter Thumb stud which is press fitted into the blade. This makes for a very strong lockup as there is no loosening of the thumb stud which can happen with two piece designs. The fact that the thumb stud locks up against the frame adds an incredible amount of strength to the sideways torque of the blade as the sideways stresses are being stopped by the whole handle side, thus relieving the stress that would normally be put on the pivot.